Featured
- Get link
- X
- Other Apps
Water Cooler Troubleshooting Guide
Water Cooler Troubleshooting Guide. You will know this is the cause of no water flow is compressor and fn are not working and everything is connected and plugged in). Drop cartridge holder out from below frame to make it accessible.
If the outlet continues to trip, check to see if the circuit is overloaded or call in a service technician to assess if the wiring is faulty. Make sure you wash the reservoir twice with tap water. The water cooler is an ez, htv, or electric eye operated model:
Loosen The Two Cartridge Holder Screws Located In The Middle Underside Of The Cooler.
You will find more than one if you have a dispenser with both hot and cold spouts. No power to the outlet. We then suggest leaving your machine for 24 hours before switching it on again.
In Such A Case, Switch Off The Machine Through The Buttons Located At The Back.
The cooler must be located on a floor which is smooth, level and easily cleaned. General care of the removable reservoir cooler caring for your water cooler 1. Push the reset button and check if the unit functions properly.
Restore Power To The Outlet.
Solution check and ensure that the main plug is plugged in and that it doesn’t have a short circuit. Water shut off valve is closed. We have complied a simple guide to help you troubleshoot eight of the most common issues experienced with bottled water coolers.
You Should Also Ensure That The.
Remove retaining nut (note that there will be a small amount of standing water in the holder. Replace the water cooler regulator. Then unplug it from the power supply outlet.
Open Water Shut Off Valve.
Top tips on water cooler troubleshooting water cooler troubleshooting. The power cord to the water cooler is open (compressor and fan will not run). If you feel that the water taste has gone bad, clean the dispenser and clear off the reservoir in the water tank.
Popular Posts
Citric Acid To Water Ratio For Descaling
- Get link
- X
- Other Apps
Comments
Post a Comment